Advertisement
Introduction
Thank you for purchasing a Kurt vise. You have just purchased one
of the best machine vises in the industry. The D-Series AngLock vise
has a time proven design. The outstanding accuracy of this product
is second to none. Backed by a lifetime warranty, this product will last
forever when used and maintained properly.
The original Kurt Anglock vises are designed for precision clamping on
basic machine tools such as knee-type mills, grinders and machining
centers. They can be used for but are not limited to operations like
precision boring, drilling, tapping, grinding & finishing.
The patented Anglock design allows the movable jaw to advance in
such a way that each pound of force forward induces a ½ pound force
downward which minimizes the jaw lift and increases accuracy. This
combined with the needle bearings increases jaw clamping pressure.
Other features include: 80,000 psi ductile iron body, hardened vise bed
& jaw plates, semi-hard steel screw.
Each pound of force in this direction.
Induces 1/2 pound of force in this direction.
Spherical segment
(hardened) produces
"all directional"
alignment.
| ENLGISH
Introduction
3
Advertisement
