Advertisement
Troubleshooting Tips
The Kurt D-Series vise will operate mostly trouble free for many years. If
properly maintained, this product is indestructible. In some cases it will
be necessary to troubleshoot. Use the information below to help in the
process.
Problem:
My vise turns hard.
Tip: As a new vise the brush seal could be stiff. Allow for break in of
vise.
Tip: As a used vise, it could be filed with chips and threads could be
jammed. Properly clean and grease vise.
Problem:
My vise will not turn in either direction.
Tip: The vise is jammed with debris. Disassemble and clean as needed.
Problem:
My vise won't hold tolerance.
Tip: You may be experiencing jaw lift from clamping too high or on
one side of the jaw. Lower the part in the vise jaw and clamp more
material.
Troubleshooting Tips
| ENLGISH
13
Advertisement
