Introduction - Kurt CROSSOVER ANGLOCK VISE DX8 Operating Instructions Manual

Introduction

INTRODUCTION
Thank you for purchasing a Kurt DX6 vise. You have just purchased one
of the best machine vises in the industry. The outstanding accuracy
Thank you for purchasing a Kurt DX8 vise. You have just purchased one of
of this product is second to none. Backed by a lifetime warranty, this
the best machine vises in the industry. The outstanding accuracy of this
product will last forever when used and maintained properly.
product is second to none. Backed by a lifetime warranty against
The original Kurt Anglock vises are designed for precision clamping on
workmanship and material defects, this product is built to last when used
basic machine tools such as knee-type mills, grinders and machining
and maintained properly.
centers. They can be used for, but are not limited to, operations like
precision boring, drilling, tapping, grinding & finishing.
The original Kurt Anglock vises are designed for precision clamping on basic
The patented Anglock design allows the movable jaw to advance in
tools such as knee-type mills and machining centers. They can be used for, such a way that each pound of force forward induces a ½ pound force
downward which minimizes the jaw lift and increases accuracy. This
but are not limited to, operations like boring, drilling, tapping, and
combined with the needle bearings increases jaw clamping pressure.
finishing.
Other features include: 80,000 psi ductile iron body, hardened vise bed
& jaw plates, semi-hard steel screw.
The patented Anglock design allows the moveable jaw to advance in such a
way that each pound of force forward induces a ½ pound of force
downward which minimizes the jaw lift and increases accuracy. This,
combined with the needle bearings, increases jaw clamping pressure.
Other features include: 80,000 psi ductile iron body, hardened vise bed &
jaw plates, and a semi-hard steel screw.
Fig.1
INTRODUCTION
Introduction | ENLGISH 3
3