Installing The Handheld - Bosch vivatmo pro Instructions For Use Manual

Administrators can additionally:
• Change QC settings, see „6.3 Quality control (QC)" on page 41.
• Change language, see „Setting the language" on page 48.
• Change time and date, see „Setting date and time" on page 48.
• Activate/de-activate auto-lock, see „Setting Auto-Lock" on page 49.
• Install printers and export locations, see „6.5.3 Printer configuration" on page 52 and „6.5.7 Export file configuration" on page 64.
• Change Vivatmo pro handheld used with the basestation, see „6.5.4 Assigning the handheld" on page 53.
• Configure network, see „6.5.5 Network configuration" on page 56.
• Configure HL7 or GDT interfaces, see „6.5.6 Order/result interface" on page 62.
• Manage user accounts, see „6.6 User administration" on page 65.
3.2

Installing the handheld

To install the handheld, insert the rechargeable battery. Turn off the device before you replace the battery.
WARNING
Do not touch the battery contacts to avoid electrical shortcut.
Instructions for use © Bosch Healthcare Solutions GmbH
Installation
19