Installing The Basestation - Bosch vivatmo pro Instructions For Use Manual

3.3

Installing the basestation

WARNING
Only use the Vivatmo pro basestation with the provided low voltage power supply unit. Attempted
use with other power sources may cause irreparable damage and invalidate the warranty.
Avoid to connect the Vivatmo pro basestation to a multiple socket-outlet to prevent interferences by
other devices.
1. Connect the jackplug from the power supply unit into the power adapter port on the rear of the Vivatmo pro basestation.
2. Plug the suitable adapter for your country firmly on the power supply unit.
3. Plug the main plug into a suitable socket. The Vivatmo pro basestation starts automatically.
Software setup
When you start your Vivatmo pro basestation the first time, you will be guided through a setup procedure of 5 simple steps,
which helps you to enter all the required settings.
1. Switch on the basestation, by pressing the ON/OFF button.
The Language screen is displayed.
Instructions for use © Bosch Healthcare Solutions GmbH
Installation
21