Sequence Player; Spectrometer Recalibration (Lightstudio-L); Introduction; Important Information - Image Engineering lightSTUDIO User Manual

5.5.6 Sequence player

1
If at least one component of a lightSTUDIO is enabled for the sequence player, all activated
sequences are started by clicking the play/stop button [1]. Clicking the play/stop button again stops the
sequence player. Progress bars display the advance of all sequences.

6 SPECTROMETER RECALIBRATION (LIGHTSTUDIO-L)

6.1 Introduction

The spectrometer requires a recalibration yearly, regardless of the operating hours. If a spectrometer
calibration is necessary, please contact Image Engineering.
The spectrometer must be sent to our office with a notation for calibration. Use appropriate packaging
to prevent the spectrometer from being damaged during shipping.
A temporary replacement spectrometer can be provided to bridge the time gap while your
spectrometer is recalibrated. Please contact us for conditions and procedures.

6.1.1 Important information:

The Fiber is sensitive, do not overbend, and handle with care.
Do not remove the Fiber from the spectrometer
Caerfully pack and cushion the spectrometer before shipping.

6.1.2 Tools

You willl need:
Image Engineering Seite 25 von 32