Table of Contents
Advertisement
Reference illuminance measurement:
When performing an illuminance measurement according to the iQ-LED manual, be aware that the
reference illuminance measurement for the acceptance protocol was measured at this position:
The initial illuminance measurement was performed at 25 cm distance from front side.
Spectral calibration:
Recommendations for calibration repetition:
During the first 600 working hours of the lightSTUDIO, perform a spectral calibration every 50
operating hours.
After the first 600 operating hours, a calibration of every 150 working hours is sufficient.
Image Engineering
Seite 15 von 32
Advertisement
Table of Contents
Need help?
Do you have a question about the lightSTUDIO and is the answer not in the manual?
Questions and answers