Table of Contents
Advertisement
9.0 Gas Fireplace Insert Setup
9.1 Glass Assembly
WARNING: Do not operate this fireplace with the glass re-
moved, cracked, or broken. Replacement of the glass as-
sembly should be done by a licensed or qualified service
person
9.1.1 Remove Glass Assembly
WARNING: Do not remove the glass assembly when hot.
1. Locate (2) spring-loaded latches securing the glass as-
sembly at the bottom of the firebox.
2. Using the glass latch tool (included in components pack-
et), pull the bottom latches out and up to release glass
frame assembly latch tabs.
3. Lift glass assembly up and off of the (2) tabs located at
the top of the firebox.
9.1.2 Install Glass Assembly
1. Align the slots on top of the glass assembly over the
tabs at the top of the firebox while lowering the bottom
of the glass assembly into position.
2. Using the glass latch tool, pull latches out and down
over latch tabs to secure glass frame assembly bottom.
Figure 9.2, Latch release
Hussong Mfg. Co., Inc.
NDK-29-i Report No. 22-815
27
Rev. 2 — November 2022
Starting Serial Number: 22 N29i00001 45
Advertisement
Table of Contents
