Dismissing An Error Code; Iaqualink Troubleshooting - Polaris ALPHA iQ+ Owner's Manual

ENGLISH
8.3

Dismissing an Error Code

From the control box:
After you have completed the troubleshooting solution steps, press any key (except the phone
icon) to clear the error code.
If the control box is in Standby Mode, press the Start/Stop button to show the on-screen display.
After you have completed the troubleshooting solution steps, press any key (except the phone
icon) to clear the error code.
From the iAquaLink
Press the error icon to display troubleshooting solutions. After you have completed the
troubleshooting solution steps, press Clear Error to return to normal operation. Or, press OK if
you need to complete the solution steps at a later time.
8.4

iAquaLink Troubleshooting

This information can help to troubleshoot connection and setup challenges between the iAquaLink app
and the cleaner.
How it Works:
Your Smart
Device
How to Connect:
You must connect to the home router (network) by first establishing a direct connection between the
control box and your smart device (see Add to Mobile App System).
It is recommended to locate the control box as close to the home router as practical. Do not use an extension cord.
Page 22
App:
®
Your
Internet
Router
Internet
Internet
Cleaner
Control
Box
IMPORTANT
Polaris Robotic Pool Cleaner | Owner's Manual
®
Robotic
Pool
Cleaner