Related Manuals for Polaris QUATTRO
Summary of Contents for Polaris QUATTRO
- Page 1 Instructi ons for installati on and use - English Pressure cleaner Translati on of the original instructi ons in French Works with Booster Pump More documents on: www.zodiac.com H0671900.A - 2019/06...
- Page 3 • Do not use the cleaner during shock chlorinati on. • Do not leave the cleaner unatt ended for an extended period. SPECIFIC FEATURES APPLICABLE TO "Polaris® pool cleaners" • Do not handle the cleaner when in operati on, except when checking the speed of the wheel.
-
Page 4: Table Of Contents
Before handling the appliance, it is vital that you read this installati on and user manual, as • well as the "warnings and warranty" booklet delivered with the appliance. Failure to do so may result in material damage or serious or fatal injury and will void the warranty. Keep and pass on these documents for later consultati on during the appliance's service life. -
Page 5: ❶ Specifi Cati Ons
❶ Specifi cati ons 1.1 I Descripti on Installed in the cleaner 1 x red 1 x blue Cleaner Filter canister - All-purpose debris Filter canister - Fine debris Hose assembly In-line fi lter Quick disconnect fi tti ng Pressure relief valve Universal wall fi... -
Page 6: I Technical Specifi Cati Ons And Parts List
1.2 I Technical specifi cati ons and parts list 1.2.1 Technical specifi cati ons Energy source Booster pump coupled to the fi ltrati on system Minimum power required by 1 HP (if the distance from the equipment room is < 15 metres) the booster pump 1.5 HP or more (if the distance from the equipment room is >... -
Page 7: ❷ Installati On
: A deviati on is created on this piping to supply the booster pump. : Polaris® pressure cleaners are connected to the wall fi tti ng transformed into a discharge port : The venturi eff ect generated... -
Page 8: I Connecti Ng The Hose To The Wall Fi Tti Ng
2.3 I Connecti ng the hose to the wall fi tti ng • Disconnect the universal wall fi tti ng (UWF®) connector ( ) from the quick disconnect plug ( ), see step • Screw the universal wall fi tti ng (UWF®) connector ( ) with the blue restrictor disc (the blue disc is already installed) onto the wall fi... -
Page 9: I Installing The Connector On The Hose
2.5 I Installing the connector on the hose • Place the nut ( ) on the end of the connector ( ), see image • Push the hose into the connector, see image . Water can be used to lubricate the hose. •... -
Page 10: ❸ Use
• The lid opening butt on showing the Polaris® logo is not a handle. • Use the Polaris® logo on the front left wheel as a marker to count the number of full revolutions made by the wheel in one minute. If the wheels change direction during the count, start again. - Page 11 3.1.1 If the water fl ow rate is insuffi cient (under 28 rpm) • Check the in-line filter assembly ( ) and remove debris, see "4.2 I Cleaning the in-line fi lter screen". • Check the hoses and connectors looking for leaks that could cause a loss of water pressure. •...
-
Page 12: I Adjusti Ng The Cleaner's Movements (If Necessary)
3.2 I Adjusti ng the cleaner's movements (if necessary) If the cleaner is operati ng correctly, it aspirates, sweeps and brushes all of the pool's surfaces randomly. Its ability to climb the walls depends on the shape of the pool and the water fl ow rate or pressure. The cleaner climbs walls more easily in pools with no sharp angles or curves between the pool bott om and the pool wall. -
Page 13: ❹ Maintenance
❹ Maintenance 4.1 I Cleaning the fi lter canister • The cleaner's performance may be reduced if the fi lter canister is full or dirty. • Clean the fi lter canister with clean water aft er each cleaning cycle. • Press the butt on to open the lid, see step •... -
Page 14: I Cleaning The In-Line Fi Lter Screen
4.2 I Cleaning the in-line fi lter screen • Turn off the booster pump; • Loosen the in-line fi lter plug, see step • Separate the in-line fi lter body from the plug, see step • Remove the screen from the fi lter, see step •... -
Page 15: ❺ Troubleshooti Ng
❺ Troubleshooti ng • Before you contact your retailer, please carry out these few simple checks using the following tables if a problem occurs. • If the problem conti nues, contact your retailer. 5.1 I Cleaner behaviour • Remeasure the hose length and check that it corresponds to that required by the shape of the pool, see "2.4 I Adjusti ng the hose length". - Page 16 Votre revendeur Your retailer Modèle appareil Appliance model Numéro de série Serial number Pour plus d’informati ons, enregistrement produit et support client : For more informati on, product registrati on and customer support: www.zodiac.com ZODIAC® is a registered trademark of Zodiac Internati onal, S.A.S.U., used under license.