Add To Mobile App System; Section 6. Iaqualink Control; Iaqualink Control Home Screen - Polaris ALPHA iQ+ Owner's Manual

Polaris Robotic Pool Cleaner | Owner's Manual
®
5.3

Add to Mobile App System

1. On the My Systems page, click + in the upper
right-hand corner to add a system.
2. Choose "Robotic Cleaner". Follow in app
instructions to add your cleaner and connect it
to your home router.
3. On the control box, press
Bluetooth
®
BLINKING - searching for signal
SOLID - paired with phone
Wi-Fi light indicator status:
BLINKING - connected to router
SOLID - connected to the internet
NOTE: Errors during connection may be the results of
insufficient Wi-Fi signal strength at the control
box location. If you are unable to move the
control or router to improve signal strength,
you may need a Wi-Fi extender to boost your
signal strength. (See iAquaLink
section.)
NOTE: An incorrect password may also be that cause
of a connection error. If the signal strength at the
control box is good, double check the network
name and credentials for the router you are
trying to access.
.
light indicator status:
Troubleshooting
®
Section 6. iAquaLink
Once you have downloaded the iAquaLink app and
connected the device to Wi-Fi, the iAquaLink app
allows for robotic cleaner control from anywhere,
anytime. Functions vary within the iAquaLink app
depending on which cleaner model you have.
WARNING
Do not enter pool while the robotic cleaner is in water.
6.1

iAquaLink Control Home Screen

App function and design is subject to change.
Start/Stop Cleaning
Remote
Clean Mode
Lift System
Dirty Canister Indicator
+
Manual Time Adjustment
–
(current run time +/- 15 minutes)
°F / C
Water Temperature Display
ENGLISH
Control
®
Page 11