Mount The Specialty Brackets - Inside Mount - Kirsch Cellular Shade Getting Started

Mount the Specialty Brackets — Inside Mount
Your order will include four specialty brackets.
■ ■
Specialty Bracket
Bend the two tabs of the bracket templates downward and insert the tabs into the holes in the headrail and bottom rail as
■ ■
shown below.
IMPORTANT: Make sure the double-sided tape on the bracket templates is facing away from the rail.
Remove the backing from the double-sided tape on the bracket templates.
■ ■
Place each rail inside the window opening at the desired mounting location.
■ ■
Press each rail against the mounting surface until the templates stick to the mounting surface.
■ ■
Carefully remove the shade from the window opening.
■ ■
IMPORTANT: Make sure the templates stay on the mounting surface.
Mark the screw holes.
■ ■
Carefully remove the templates from the mounting surfaces.
■ ■
Drill the screw holes using a
■ ■
Attach the specialty brackets using the screws provided.
■ ■
IMPORTANT: The specialty brackets should be aligned and level with each other.
INSTALLATION
INSTALLATION
Bracket Template
Tabs
Double-sided Tape
Double-sided Tape
⁄ " drill bit.
3
32
Proceed to "Install the Shade" on page 6.
3