Advertisement
2. Composition of the machine
*Non - contractual pictures and drawings
WARNING!
Unplug the machine before any intervention.
1 - Laser activation switch
2 - Machine activation switch
3 - Handle with switching on trigger
4 - Top blade protection housing
5 - 250 mm or 350 mm blade - 30 mm bore
6 - Lower housing
7 - Carbon sets maintained by means of stoppers.
8 - Cutting stop rail: supports the workpieces; it
allows making repetitive cuts easily, it is also
equipped with holes in order to fix an auxiliary
element if desired.
9 - Swivelling table
10 - Blade slide
11 - Locking screw of the saw table: allows adjusting
and maintaining the saw table at determined and
specific angle.
12 - Scale of graduation for the adjustment of the
base tilt
13 - Pre-drilled frame for fixing on the workbench
14 - 1 Locking screw of the machine
14 - 2 Protective Cover of the belt drive
15 - Slides: a guide to the saw head for radial cuts
16 - Slide support: support
additional retaining the working parts for composite
cutting (available according to the models)
17 - Side extensions
18 - Scale of graduation for the adjustment of the
saw head tilt
19 - Carrying handle
20 - Power Cable: 5 meter for higher mobility
21 - Laser integrated beam
22 - Scale of graduation for the saw head tilt
Advertisement
