Advertisement
c) Unlocking the cutting arm:
To turn the saw on, you should unlock the lower blade
guard. Therefore, press the locking device (no.2) and then press
the switch (no.1) to turn on the mitre saw.
To stop the saw, release the trigger switch no.1.
You should never stop the blade rotation by exerting side
pressure on it.
As a safety measure, the lower blade guard is locked
systematically as soon as you
release the trigger switch.
The lower guard retracts over the top blade guard when the top
blade is in contact with the workpiece.
d) Connection of the dust and chips collector bag:
e) Mounting and adjustment of the table extensions:
You can use the table extensions to work on long pieces of wood.
These extensions can be placed on the right or left according to your
needs.
Insert the extensions in the notches provided and tighten the locking
screw so that the extensions do not move while using the machine.
Insert the dust bag over the extraction outlet located at the rear of
the machine.
You can also connect a vacuum hose to the dust extraction bend to
improve suction. The dust bag should be emptied frequently. The
dust bag is equipped with a zipper to empty it more easily. A full
bag greatly reduces its effectiveness. This bag needs to be cleaned
regularly in soapy water; before reuse, be sure to dry thoroughly.
Caution: Dust particles can cause respiratory problems. For your
protection, wearing a dust mask according to the standards in force
is advisable.
Advertisement
