Operating Instructions PRM-317-3G • PRECAUTION Before operating this unit, please read this manual carefully. WARNING: To reduce the risk of any electric shock, please do not remove the back cover. No user serviceable parts inside. Refer any service matters to qualified service personnel.
Page 6
This product should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product damages. Accessories Do not use accessories not recommended by PLURA Inc. as they may cause hazards. Ventilation Do not block any of the ventilation openings.
Page 7
Operating Instructions PRM-317-3G If the product exhibits a distinct change in performance. 17. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition and the warranty seal is provided 18.
• S-Log LUT curves integration included (1) PRM-317-3G + "PRM-217-3GFW25G" license = SFP-217-25G. Refer to SFP-25G data sheet for more specifications. (2) PRM-317-3G + "PRM-217-3GFW4K" license = PBM-217-4K. Refer to PBM-4K data sheet for more specifications. Re-imagine Beyond Technology sales@plurainc.com...
Page 9
Internal Pattern Generator and Wall Control System (1) PRM-317-3G + "PRM-217-3GFW25G" license = SFP-217-25G. Refer to SFP-25G data sheet for more specifications. (2) PRM-317-3G + "PRM-217-3GFW4K" license = PBM-217-4K. Refer to PBM-4K data sheet for more specifications. Re-imagine Beyond Technology...
Operating Instructions PRM-317-3G • Functional explanation of each part 1. Front Panel Tally LED PRM-317-3G • Speaker Headphone Front Key Front Keys Arrangements • Re-imagine Beyond Technology sales@plurainc.com...
Operating Instructions PRM-317-3G 2. Rear Panel I/O Details • DC Battery IN • PI N NO Description PRM-37-3G / 2 , 3 DC I N 12V PBM-217-4K ONLY DC I N 24V PBM-224-4K & PBM-324-4K ONLY 12-24V RJ-45 Connections •...
Operating Instructions PRM-317-3G - Firmware Upgrade/ System Controller / Ember+ (Ethernet) & GPI Remote PI N Assignment 8 PI N COMMON(GND) 4 PI N GPI 4 PORT GPI 7 PORT 7 PI N 3 PI N GPI 3 PORT (STAND BY/ POWER ON/ OFF)
Operating Instructions PRM-317-3G • MENU OVERVIEW I n this system menu, there are several ways to maneuver the menu settings. Most menus consist of three levels to select the necessary option, but some settings require greater MENU depth. I f you press the button, the first and second level of the menu system will appear on the monitor screen.
Operating Instructions PRM-317-3G • BASIC OPERATION Turning On the Monitor Firstly, make sure you have connected the AC power cord or DC XLR connector. The monitor will switch to standby or power on mode. I f the monitor is in standby mode, press the ST-BY button to turn on the monitor.
Operating Instructions PRM-317-3G • On Screen Menus Selection and Adjustment How to adjust the OSD screen MENU UP/ DOWN 1. Press the button and then button to select each menu. UP/ DOWN ( SEL/ I NPUT) / MENU 2. Press the...
Operating Instructions PRM-317-3G • SELECT VIDEO INPUT 1. How to Select Video Source by OSD SET/ I NPUT UP/ DOWN 1. Press the button and then button to select the required video source. SET/ I NPUT 2. Press the button to select the desired video source.
Operating Instructions PRM-317-3G • VIDEO MENU OPTIONS 1. Adjust - Adjust the values of Brightness, Contrast, Color, Tint and Sharpness range from -50 to 50 2. Color Temperature Control - For Setting the Color temperature or adjusting RGB gain value - User (User setting RGB gain value), VAR( 3200K ~ 9300K), Most common value ( 9300K, 6500K, 5400K,3200K) and 3D LUT Calibration value(D65 –...
Operating Instructions PRM-317-3G 3. Aspect Ratio - For setting the aspect ratio. - Pixel to Pixel: Video input will match the video display resolution (NO Scaling). I f input resolution is higher than panel resolution, the video will be downscaled to match the panel resolution.
Operating Instructions PRM-317-3G 3. Center Maker “+ ” display Marker on center of screen 4. Marker Width -Marker line thickness setting. (0~ 10) 5. Marker Color - Marker Line Color: Select Marker line color (White, Yellow, Blue, RED, Black) - Safety Line Color: Select Safety line color (White, Yellow, Blue, RED, Black) - Marker Back Color: Select Marker Back Color.
Operating Instructions PRM-317-3G • GPI MENU OPTIONS 1. GPI Control & GPI Ports - For programming selected functions to particular GPI ports. - GPI Controller can be utilized to remotely control the monitor. - GPI Control: GPI function Enable/ Disable...
Operating Instructions PRM-317-3G Menu Key, Enter Key, Up Key, Down Key Use the key function by GPI . Left Key, Right Key Function key1 ~ 6 Function key1 ~ 6 H/ V delay H delay, V delay, HV delay, Off Aspect Full Screen, 16: 9, 4: 3, 14: 9, 13: 9, 1.85: 1,...
Operating Instructions PRM-317-3G - Factory Default: User Reset. 2. Function 1 ~6 - Function 1~ 6: Select the required function to be allocated to the FUNCTI ON Keys 1, 2, 3, 4, 5, 6. Function1~ 6 button Description UNDEF Not set (no function allocated)
Operating Instructions PRM-317-3G UMD BG Color: UMD BG color Select (RGB_255_192_128_Transparent) 4. Advanced I nformation, Control, Screen Control, Network Configuration I nformation • - Version, Release day, Release time, operating time, FPGA Version Control • - FRONT LED: Front LED on/ off - Local Enable: Power, up and down key is only operational, if Local enable is off.
Operating Instructions PRM-317-3G 6. Set ID Set I D is required for remote control. Set I D range (01~ 99). 7. Video Range -Range Check: Range Check on/ off. -Y Max: Maximum luminance level. -Y Min: Minimum luminance level. -C Max: Maximum chroma level.
Need help?
Do you have a question about the PRM-317-3G and is the answer not in the manual?
Questions and answers