Safety Precautions WARNING: CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRICK SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION: The lightning flash CAUTION: The exclamation point CAUTION: THIS EQUIPEMNT MUST BE GROUNDED CAUTION:...
Safety Precautions Caution for AC Power Cord FOR CONTINENTAL EUROPE, ETC FOR U.K. ONLY FOR U.S.A. and Canada Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) CE NOTICE...
3. Controls 3-4. Function Buttons for FUNCTION 1 and FUNCTION 2 Used to confirm the operating status. Some functions are not supported, depending on the installed options. Functions: The FUNCTION 1 and FUNCTION 2 buttons (F1, F2) cannot be assigned the same functions. Note: When the input modes are DVI, PC-RGB, YPbPr or RGB, the following functions are not available:...
6. Control and Use of OSD Menu 6-1-1. Video (RGB, YPbPr) Auto Color Balance 6-2. Display PaP Main PaP Sub Waveform Display & Vectroscope: (PBM-184/117/120/124/126/132/142/147/155) Time Code Display: (PBM-184/117/120/124/126/132/142/147/155) Pixel to Pixel...
Page 23
6. Control and Use of OSD Menu 6-2-1. Display (PC-RGB) Clock AUTO Adjust PaP Main, PaP Sub (Option) 6-3. Color...
Page 24
6. Control and Use of OSD Menu 6-4. Marker Type of Marker Center Marker Marker Color Marker Back Color Status/Menu Display Status/Menu Blend Menu Position Closed Caption Decoding 6-5. Audio Speaker Source Speaker Output Speaker Volume...
Page 25
6. Control and Use of OSD Menu 6-6. GPI Control Remote ID Number Serial Remote 6-7. System Configuration Setup Load: User 1,2,3: Setup Save: Firmware Version: Operating Time:...
7. How to use Program Update Port Program Update Port (RJ-11) Update Terminal Assignment 8. Remote Terminal Assignment 8-1. Remote Terminal (RJ-45) Assignment Remote PIN Assignment 8-2. How to connect GPI Port Contact Point Switch...
Page 27
8. Remote Terminal Assignment 8-2. Remote Terminal Assignment Port Assignment Items Function Operating conditions 8-3. How to connect and control multiple Monitors Adaptor Specifications of this product may be changed without prior notice.
9. List of Compatible Signal Formats 9-1. Video Signal Composite Component No Input Signal Formats Video Y,Pb,Pr R,G,B HD/SD-SDI (SOG) 9-2. Computer Signal (PC-RGB/DVI) Input Signal Names Screen Resolution PC-RGB Vertical Frequency...
10. Specifications Function PBM-070 PBM-184 PBM-117 SDI-INPUT SDI-OUTPUT VGA INPUT DVI INPUT ANALOG INPUT SDI DIGITAL FORMAT SPEAKER POWER OPERATING TEMP. WEIGHT (w/o Stand) DIMENSIONS (W x H x D) w/o Box & Stand ACCESSORY OPTION...
Page 30
10. Specifications Function PBM-120 PBM-124 PBM-126 SDI-INPUT SDI-OUTPUT VGA INPUT DVI INPUT ANALOG INPUT SDI DIGITAL FORMAT SPEAKER POWER OPERATING TEMPERATURE WEIGHT (w/o Stand) DIMENSIONS (W x H x D) w/o Box & Stand ACCESSORY OPTION...
Page 31
10. Specifications Function PBM-132 PBM-137 PBM-142 SDI-INPUT SDI-OUTPUT VGA INPUT DVI INPUT ANALOG INPUT SDI DIGITAL FORMAT SPEAKER POWER OPERATING TEMPERATURE 66.139 79.366 WEIGHT (w/o Stand) DIMENSIONS (W x H x D) w/o Box & Stand ACCESSORY OPTION...
Page 32
10. Specifications Function PBM-147 PBM-155 PBM-170 SDI-INPUT SDI-OUTPUT VGA INPUT DVI INPUT ANALOG INPUT SDI DIGITAL FORMAT SPEAKER POWER OPERATING TEMPERATURE WEIGHT (w/o Stand) DIMENSIONS (W x H x D) w/o Box & Stand ACCESSORY OPTION...
11. IR Remote Controller IR Remote Controller is for 32”, 37”, 42”, 47”, 55”, and 70”. Monitor Operation ON/OFF IR R/C, please use the same IR Remote ID number. either multiple R/C’s, or GPI control. Operation Range of IR Remote Controller...
Need help?
Do you have a question about the PBM-070 and is the answer not in the manual?
Questions and answers