Advertisement
STANDARD TIRE PRESSURE PROGRAMMING
To return the TPMS programming from the inch-up tire to the standard tire, memorize the tire pressure sensor ID and
change the tire pressure programming.
1.
Replace with the standard tire, and memorize the tire pressure sensor ID according to the instructions in Service
Manual.
2.
Change the tire pressure programming (the low air pressure warning threshold):
1. Connect the HDS to the vehicle, make sure the correct VIN is populated and enter the mileage.
2. At the System Selection Menu, click TPMS.
3. At the Mode Menu, click the DTC and clear any stored codes.
4. Go back to the Mode Menu, click on Threshold Rewriting.
5. Click on Reprogramming for standard tires and follow the screen prompts.
6. After programming, write the standard tire pressure in the service history page for Honda Accessory Wheels,
then click the check button.
7. Attach the tire pressure information label for standard tire at the prescribed location.
8. After programming, write the following information on the service history page for Honda Accessory wheels.
Write tire size, tire pressure, HDS version, dealer name, technician's signature, and date in service history page for
Honda Accessory Alloy wheels page attached on the vehicle's Service history booklet.
8 of 9
DATA LINK
CONNECTOR
HDS
CODE
AII 37562 (0709)
7111120Y
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
Advertisement
