Advertisement
MEMORIZING THE TIRE PRESSURE SENSOR ID
10. Using the HDS and Snap-on TPMS sensor initializer
tool, memorize the ID of tire pressure sensor ID
according to the instructions in the Service Manual
(Memorizing the Tire Pressure Sensor ID).
DATA LINK
CONNECTOR
CODE
4 of 9
HDS
7111120Y
SNAP-ON
TPMS SENSOR
INITIALIZER TOOL
6912020B
11. Open the driver's side door. Using isopropyl alcohol,
thoroughly clean the area where the Tire Pressure
Information Label will attach. Remove the adhesive
backing from the label and attach it over the existing
vehicle caution label as shown.
10-DIGIT NUMBER TIRE PRESSURE
STANDARD TIRE
INFORMATION LABEL
12. Attach the "Supplemental Information" page
included in this kit to the Owner's Manual. To
properly attach the page, refer to "To the dealer:"
attached to the "Supplemental Information" page.
AII 37562 (0709)
INFORMATION LABEL
ACCESSORY TIRE
PRESSURE
INFORMATION LABEL
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
7125540B
Advertisement
