Advertisement
13. Perform the Inch-up Tire Pressure programming procedure as follows.
INCH-UP TIRE PRESSURE PROGRAMMING
(LOW AIR PRESSURE WARNING THRESHOLD REPROGRAMMING)
1.
After doing the sensor ID learning procedure using the HDS, back up to the TPMS Mode Menu, and click on
Threshold Rewriting.
2.
Select "Reprogramming for accessory tires".
3.
When the HDS says "Do you want to rewrite the threshold data?" click "YES".
4.
Check that "Please enter the tire information code of new tires" is shown, and click the "Key board" icon.
5.
Enter the 10-digit tire information code printed on the new tire pressure information label, then click the check icon.
6.
Check that the tire pressure shown on HDS, and the new tire pressure on the tire information label are the same,
click the "YES" button for programming.
7.
Check that the current air pressure setting shown on HDS is correct and "Reprogramming the threshold data for
non-standard tires has completed successfully" is shown.
8.
After programming, write the tire pressure indicated on the HDS in the service history page for Honda Accessory
Wheels, then click the check icon.
9.
After programming, sign on the service history page for the Honda Accessory wheels, according to the procedure
on page 6.
DATA LINK
CONNECTOR
CODE
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
HDS
7111120Y
AII 37562 (0709)
10-DIGIT NUMBER
TIRE PRESSURE
INFORMATION
LABEL
7125550B
5 of 9
Advertisement
