Advertisement
STANDARD TIRE PRESSURE PROGRAMMING
If the original equipment (standard) tires are to be installed back on the vehicle, memorize the tire pressure sensor ID
and the low pressure warning threshold must be changed back, follow the procedure on page 8.
NOTE: Have a standard tire pressure label on hard.
THRESHOLD DATA CHECK
If for some reason you are unsure of where the low pressure warning threshold is set, it can be checked by using
Threshold Data Check, follow the procedure on page 9.
TPMS Unit Replacement
If the TPMS control is ever replaced and the vehicle has inch up wheels, the low pressure sensor threshold must be
changed, once the TPMS control unit is installed follow steps 10 to 14 (which includes memorizing ID and programming
for accessory tires).
7 of 9
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
AII 37562 (0709)
Advertisement
