Table of Contents
Advertisement
Specifications
The RouteFinder conforms to the following specifications.
•
Routing Protocols - IP and IPX and bridging for all others
•
WAN Interface - 1 async or sync link (RS-232C/V.35)
•
Command Port - 19.2 Kbps asynchronous
•
T1 DSU - 1.544 Mbps synchronous
•
Ethernet LAN Interface - 10Base-T (twisted pair)
•
Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs)
Caution: SIMM speed and size cannot be mixed.
•
1 MB of Flash memory
WAN 2 Port
•
115.2 Kbps asynchronous RS-232/V.35 (WAN 2) or T1 (1.544 Mbps) sync link using DB25
male connector. Optional ITU-T V.35 interface using a V.35 adapter cable.
Command Port
•
Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB9 cable with a
female connector.
T1 DSU Port
•
Single T1 line port with synchronous data format
•
AMI or B8ZS line coding
•
D4 Super Frame or Extended Super Frame support
•
1 to 24 channels at 56 Kbps or 64 Kbps each
•
RJ-48 jack
Ethernet Port
•
One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector
Electrical/Physical
•
Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
•
Frequency - 47 to 63 Hz
•
Power Consumption - 10 Watts
•
Dimensions - 1.625" high x 6" wide x 9" deep
•
Weight - 2 pounds (.92 kg)
•
Temperature
Operating: 32
Storage: 4
•
Relative Humidity - Up to 95%, non-condensing
MTASR2-203
4.13 cm high x 15.24 cm wide x 22.86 cm deep
o
o
o
to 122
F (0
to 50
o
to 158
o
F (-20
o
to 70
o
Chapter 1 - Introduction and Description
o
C)
C)
11
Advertisement
Table of Contents
