Page 2
INDEX 1. GENERAL INFORMATION – WARNINGS & CAUTIONS 2. HOW TO USE – a. ADJUSTABLE FEET b. ADJUSTING THE HEIGHT OF THE COUCH c. MOVING THE COUCH d. ALTERING THE MANUAL BACKREST 3. CLEANING INSTRUCTIONS 4. MAINTENANCE 5. WARRANTY 6. TECHNICAL DATA SEERS X-PLINTH OSTEO COUCH –...
GENERAL INFORMATION. CONGRATULATIONS on the purchase of your SEERS MEDICAL Product. If these operating instructions are adhered too, this product will provide many years of safe use. IF THESE OPERATING INSTRUCTIONS ARE NOT FOLLOWED - YOUR WARRANTY COULD BE INVALID! Always keep these Operating Instructions available for reference.
Ensure the wheels are free to roll along the floor when raising or lowering the couch. ENSURE FEET ARE CLEAR FROM WHEELS Hydraulic Elevation (model XP1006 & XP1026) To elevate the couch, push the pedal downwards with your foot. Repeat until correct height is achieved.
Page 5
Electric Elevation (models XP1007 & XP1027) 1Way Hand Switch 1 Way Foot Switch MOVING THE COUCH 1. The couch is fitted with a carry handle to allow the table to be moved. 2. To avoid damage to the hydraulic pump, it is recommended that the table is only lifted by the handle once the couch is raised to MAXIMUM height.
3. CLEANING INSTRUCTIONS WARNING! Disconnect the couch from the mains power supply prior to carrying out any cleaning or decontaminating. DO NOT SATURATE PRODUCT IF PRODUCT GETS SATURATED DURING CLEANING, THIS COULD ACCELERATE CORROSION, REDUCING PRODUCTS LENGTH OF SERVICE. General Cleaning: To get rid of any dust or marks on the surface the Faux Leather MUST be wiped DAILY with a moist soft cotton cloth.
Page 7
Frequency of routine couch cleaning will depend on exact application. 1. Ensure the couch is in a suitable area for cleaning. 2. The couch must be OFF of the wheels. 3. Disconnect from mains power supply if electric model. 4. Control handsets can be wiped over using an alcohol wipe. 5.
4. MAINTENANCE WARNING! Disconnect the couch from the mains power supply prior to carrying out any maintenance. All electrical maintenance should be performed by a suitably qualified person. BLUE or BROWN wires must not be connected to any earth terminal. A visual inspection should be carried out daily prior to use.
6. TECHNICAL DATA XP1006 XP1007 Index Configuration Elevation Control Hydraulic Electric Overall Length (cm) Width (cm) Minimum Height (cm) Maximum Height (cm) Safe Working Load & 200 Kg (440lbs) Lifting Capacity Electrical Data 115 v Power 220v – 240v AC 50 Hz...
Page 11
TECHNICAL DATA (cont’d) XP1026 XP1027 Index Configuration Elevation Control Hydraulic Electric Head Length (cm) Foot Length (cm) Overall Length (cm) Width (cm) Minimum Height (cm) Maximum Height (cm) Safe Working Load & 200 Kg (440lbs) Lifting Capacity Electrical Data 115 v Power 220v –...
Need help?
Do you have a question about the XP1006 and is the answer not in the manual?
Questions and answers