Related Manuals for Seers Medical ST7640
Summary of Contents for Seers Medical ST7640
- Page 1 OPERATING INSTRUCTIONS SEERS Therapy Tilt Table Model No.’s: ST7640, ST7641, ST7641DL, ST7647, ST7647DL DOC No. 03-007-UM ISSUE 2...
- Page 2 INDEX 1. GENERAL INFORMATION – WARNINGS & CAUTIONS 2. HOW TO USE – a. WHEEL SYSTEM b. ADJUSTING THE HEIGHT OF THE COUCH c. APPLYING TILT TO THE COUCH d. ALTERING THE BACK REST ANGLE e. ADJUSTING THE FOOTBOARD ANGLE f.
-
Page 3: General Information
1. GENERAL INFORMATION. CONGRATULATIONS on the purchase of your SEERS MEDICAL Product. If these operating instructions are adhered too, this product will provide many years of safe use. IF THESE OPERATING INSTRUCTIONS ARE NOT FOLLOWED - YOUR WARRANTY COULD BE INVALID! Always keep these Operating Instructions available for reference. - Page 4 2. HOW TO USE. a. WHEEL SYSTEM WARNING! This Couch is not designed for patient transportation Ensure Wheels are Locked prior to patient transfer or treatment. Disconnect the electric lead prior to re-locating the couch, ensuring the lead is not trapped in the mechanism, or placed in a position to cause a trip hazard! Wheel Lever Down Wheel Lever Horizontal...
-
Page 5: Adjusting The Footboard Angle
c. APPLYING TILT TO THE COUCH To apply tilt to the couch, simply press the raise or lower button of the bottom button indicated by the tilt symbol, until desired angle is achieved. Once the button is released the tilt angle is locked in that position ready for use. - Page 6 WHEN RAISING OR LOWERING THE COUCH – ENSURE THE SLIDING BRACKETS AND HAND HOLDS ARE NOT LOCATED IN SUCH A POSITION THAT COULD CAUSE ENTRAPMENT. THIS COULD CAUSE DAMAGE. g. WORKTABLE (optional on Model ST7640) 1. Ensure the sliding brackets are at roughly the same height on each side of the couch.
- Page 7 Always ensure that the straps and harnesses are in the correct position and that the patient is fully secure before operating the tilt facility. Only use straps/harnesses supplied by SEERS Medical Ltd. The Standard Tilt Tables are supplied with the following Fixation Strap Set ( 6062 ):...
- Page 8 Always ensure that the straps and harnesses are in the correct position and that the patient is fully secure before operating the tilt facility. Only use straps/harnesses supplied by SEERS Medical Ltd. The Split Leg Tilt Tables are supplied with the following Fixation Strap Set (6063): The 6063 Strap set comprises of 2 x 6066 and 2 x 6064.
-
Page 9: Optional Accessories (Not Included)
OPTIONAL ACCESSORIES (not included) PELVIC STABILISERS (MODEL ST6058) 1. Locate the lower sliding bracket on the side rail to the desired height. 2. Adjust the height and distance in to the patient of the stabiliser, by loosening the relevant locking lever, adjusting to desired position and the re-tightening to secure. -
Page 10: Cleaning Instructions
3. CLEANING INSTRUCTIONS WARNING! Disconnect the couch from the mains power supply prior to carrying out any cleaning or decontaminating. DO NOT SATURATE PRODUCT IF PRODUCT GETS SATURATED DURING CLEANING, THIS COULD ACCELERATE CORROSION, REDUCING PRODUCTS LENGTH OF SERVICE. General Cleaning: To get rid of any dust or marks on the surface the Faux Leather MUST be wiped DAILY with a moist soft cotton cloth. - Page 11 Frequency of routine couch cleaning will depend on exact application. 1. Ensure the couch is in a suitable area for cleaning. 2. The couch must be OFF of the wheels. 3. Disconnect from mains power supply if electric model. 4. Control handsets can be wiped over using an alcohol wipe. 5.
- Page 12 Cleaning and Decontamination of Tilt Table Straps It is not recommended that the straps are laundered on a regular or routine basis as this will eventually compromise the integrity of the material and associated Velcro. Tilt Table straps should be decontaminated when visibly soiled or if used on a patient known or suspected of being infectious.
-
Page 13: Maintenance
4. MAINTENANCE WARNING! Disconnect the couch from the mains power supply prior to carrying out any maintenance. All electrical maintenance should be performed by a suitably qualified person. BLUE or BROWN wires must not be connected to any earth terminal. A visual inspection should be carried out daily prior to use. -
Page 14: Warranty
W: www.seersmedical.com © SEERS MEDICAL Limited 2017 Manufactured in the UK by SEERSMEDICAL Limited. As part of our ongoing development programme SEERS MEDICAL Limited reserves the right to alter or modify specifications and materials without prior notice. DOC No. 03-007-UM... -
Page 15: Troubleshooting
6. TROUBLESHOOTING Fault Possible Cause Solution Electrical functions not working Mains cable has become disconnected, Locate control box and see whether the power light correctly either from the wall socket or the control is illuminated and that the lead is connected at both ends. -
Page 16: Technical Data
Type B Equipment CERTIFIED TO CSA STANDARD C22.2 No 60601-1 mark on this product demonstrates conformity with the Medical Device Directive 93/42/EEC. 3154358 The Control box used on this SEERS Medical Product is a Recognized Component DOC No. 03-007-UM ISSUE 2... - Page 17 SEERS MEDICAL Limited Kenton Road Debenham Suffolk IP14 6LA t: +44 (0)1728 861590 f: +44 (0)1728 861868 info@seersmedical.com w: www.seersmedical.com © SEERS MEDICAL Limited 2017 mark on this product demonstrates conformity with the Medical Device Directive 93/42/EEC. DOC No. 03-007-UM ISSUE 2...
Need help?
Do you have a question about the ST7640 and is the answer not in the manual?
Questions and answers