Software Setup; Overview; Windows Setup; User Name And Password - Multitech MultiVOIP MVPGK1 Gatekeepers Quick Start Manual

MultiVOIP Gatekeeper

2 Software Setup

Overview

Windows NT Server 4.0 and the Gatekeeper software are pre-
installed on the Gatekeeper. However, you must set up the net-
work parameters in Windows before the Gatekeeper software
can be used. The default version includes a 20-user license for
users and a five-user license for administrators.

Windows Setup

User Name and Password

The first time you start Windows, enter the following user
name and password into the Logon Information dialog box:
User name: administrator
Password: MVPGK1
These are the default user name and password; you can
change them or add new accounts as you wish. Please note
that the password is all upper case.

Network Setup

1. To set up the network parameters, open Control Panel and
double-click the Network icon.
2. Select the Protocols tab.
3. In the Network Protocols box, double-click TCP/IP Proto-
cols to open the Microsoft TCP/IP Properties dialog box.
4. In the IP Address tab, select Specify an IP address, and
enter an IP address, subnet mask, and default gateway for
the Gatekeeper. (The default IP address, 200.2.9.1, was
selected not to conflict with an existing address on your
network.)
6