Triumph Tiger 850 Sport Owner's Handbook Manual page 57

It also briefly allows the riding mode to
be changed back to the original riding
mode. Otherwise, the last selected riding
mode will be remembered and activated
when the ignition is switched ON.
If the mode icons are not shown when
the ignition switch is in the ON position,
make sure that the engine stop switch
is in the RUN position.
1
RIDING MODE
SPORT
21.5 o C
3
4
6
8
10
12
F E
1. Mode button
2. New riding mode
3. Current riding mode
To select a riding mode:
▼ Press and release the MODE button
on the left hand switch housing to
activate the riding mode selection
tray.
▼ The currently active riding mode icon
is shown in the right hand side of the
display.
M
SELECT
RAIN ROAD
ABS ROAD MAP RAIN TCS RAIN
10:55
AM
+ 9
52 ABS
SET 100
0 0
2 2
4
6
8
10
12
MPH
C H
x1000rpm
2 3
GENERAL INFORMATION
To change the selected riding mode:
▼ Press the joystick left or right, or
repeatedly press the MODE button
until the required riding mode is
highlighted in the center of the
riding mode information tray.
▼ A brief press of the joystick center
will select the required riding mode,
and the riding mode icon in the right
hand side of the display will change.
▼ The selected mode is activated once
the following conditions for switching
modes have been met:
Motorcycle Stationary - Engine Off
▼ The ignition is switched ON.
▼ The engine stop switch is in the RUN
position.
Motorcycle Stationary - Engine Running
▼ Neutral gear is selected or the clutch
is pulled in.
57