Triumph Tiger 850 Sport Owner's Handbook Manual page 63

Bike Set Up - Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
TURN SIGNALS
AUTO BASIC
AUTO ADVANCED
MANUAL
BACK
Selecting a Turn Signals Mode
To select the required turn signals
mode:
▼ From the Bike Set Up menu, push the
joystick down
SIGNALS and press the joystick
center to confirm.
▼ Push the joystick down/up to scroll
between AUTO
ADVANCED and MANUAL.
– Auto Basic - The self-canceling
function is on. The turn signals
will activate for eight seconds and
an additional 71 yards (65 meters).
– Auto Advanced
canceling function is on. A short
press activates the turn signals
for three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71 yards (65 meters).
– Manual -
function is off. The turn signals
must be manually canceled using
the turn signal switch.
▼ Press the joystick center to confirm
the required selection.
▼ The display will then return to the
Bike Set Up menu.
EXIT SELECT
to select TURN
BASIC, AUTO
- The self-
The self-canceling
GENERAL INFORMATION
Bike Set Up - Traction Control (TC)
The Traction Control (TC) system can be
temporarily disabled.
Control (TC) system
permanently disabled,
automatically enabled when the ignition
is turned off and then on again.
ENABLED
DISABLED
BACK
To disable or enable the TC system:
▼ From the BIKE SET UP menu, press
the joystick center to select TC.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
▼ Press the joystick center to select
the required option.
▼ Once selected the display will return
to the BIKE SET UP display.
The Traction
cannot be
it will be
TC
EXIT SELECT
63