Faceplate Finishing - Regency Fireplace Products Grandview G800EC Owners & Installation Manual

Faceplate Finishing

A 1/2" gap must be maintained on the sides of the
fireplace to allow the Face Plate to be installed and
removed.
Do NOT finish past the front face of the fireplace.
Top View
Mounting Tab
Folded For-
ward
Face Plate
" (19 mm)
3
4
Framing
Nailing Flange
folded forward
Critical Finishing Gap
Nailing Flange
Tabs folded
forward
Mounting Tabs
folded forward
Install the faceplate by resting the arms on the Face
Plate on top of the mounting tabs.
Adjust left and right to center the Face Plate.
NOTE: Do not to touch the faceplate without clean,
soft, gloves. Dirt or oils can be transferred onto
the finish and become permanent.
Grandview
installation
G800EC Gas Fireplace | 43
®