Fcc Part 68 Telecom - Multitech MultiFrad FR111A User Manual

100 series one port frame relay access device with 56k dsu

Hide thumbs

Table Of Contents

Table of Contents

This equipment complies with part 68 of the Federal Communications Commission Rules. On

the outside surface of this equipment is a label that contains, among other information, the FCC

registration number. This information must be provided to the telephone company.

As indicated below, the suitable jack (Universal Service Order Code connecting arrangement) for

this equipment is shown. If applicable, the facility interface codes (FIC) and service order codes

(SOC) are shown.

A FCC compliant telephone cord and modular plug is provided with this equipment. This

equipment is designed to be connected to the telephone network or premises wiring using a

compatible modular jack which is Part 68 compliant. See installation instructions for details.

The ringer equivalence number (REN) is used to determine the quantity of devices which may be

connected to the telephone line. Excessive REN's on the telephone line may result in the device

not ringing in response to an incoming call. In most , but not all areas, the sum of the REN's

should not exceed (5.0). To be certain of the number of devices that may be connected to the

line, as determined by the total REN's, contact the local telephone company.

If this equipment causes harm to the telephone network, the telephone company will notify you in

advance that temporary discontinuance of service may be required. But if advance notice is not

practical, the telephone company will notify the customer as soon as possible. Also, you will be

advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or

procedures that could affect the operation of the equipment. If this happens, the telephone

company will provide advance notice in order for you to make necessary modifications in order

to maintain uninterrupted service.

If trouble is experienced with this equipment (the model of which is indicated below) please

contact MultiTech Systems, Inc. at the address shown below for details of how to have repairs

made. If the equipment is causing harm to the network, the telephone company may request

you to remove the equipment from the network until the problem is resolved.

No repairs are to be made by you. Repairs are to be made only by MultiTech Systems or its

licensees. Unauthorized repairs void registration and warranty.

This equipment should not be used on party lines or coin lines.

10. If so required, this equipment is hearing-aid compatible.

FR111A