Specifications
Data Port
•
Single data port with synchronous or asynchronous data format
•
Async data rate from 300 Kbps up to 115.2 Kbps or sync data rate from 4.8 Kbps up to 128
Kbps (internal DCE clocking)
•
RS-232C and ITU-T V.35 interface using an adapter cable
•
Internal shunt plugs to configure RS-232C or ITU-T V.35 interface
•
Async data format of 5,6,7, or 8 bits; 1, 1½, or 2 stop bits; odd, even, or no parity
•
Sync data format is HDLC/SDLC; NRZ or NRZI encoding; mark or flag idle
•
Data port connector is a DB-25 female
Trunk
•
Single trunk port with synchronous DDS or compatible data format
•
Sync data rate of 56 Kbps
•
DDS interface with an RJ-48 keyed jack
•
Full duplex over LADS (Local Area data Set) or two-pair non-loaded metallic wire
Electrical/Physical/Environmental
•
Voltage - 115v AC, 50/60 Hz
•
Power - 5 watts
•
Dimensions - 4.3" W x 1" H x 5.6" L
•
Weight - 8 oz (224 g)
•
Temperature - 32° to 120° F (0° to 50° )
•
Humidity - 20 - 90% non-condensing
Frame Relay Compatibility
•
Link management via Annex D (ANSI T1.617), Annex A (ITU-T Q.933) or LMI
•
Supports one PVC with DLCI number from 16 to 1007
•
Congestion management
•
Throughput management via settable CIR and Be values
FR111A
- 10.8 cm x 2.5 cm x 14.2 cm
Chapter 1 - Introduction and Description
11