Configure The Ethernet Interface Using The Web Management Software - Multitech MTCBA-C-EN-N1 Quick Start Manual

MultiModem Wireless Modem with Ethernet Interface
Configure the Ethernet Interface
Using the Web Management Software
You are now ready to configure the Ethernet interface. This is
accomplished by using the modem's factory-installed Web
Management software. The software is accessed through a Web
Browser.
1. From the workstation, open a Web Browser.
Type the default Gateway Address: http://192.168.2.1
2. Login
After entering the Address, the Login screen displays.
•
Type the default User name: admin (all lower-case).
•
Type the default password: admin (all lower-case).
User Name and Password Note:
Password are case-sensitive (both must be typed in
lower-case). A password can be up to 12 characters. If
Windows displays the AutoComplete screen, you may
want to click No to tell the Windows OS not to
remember the password; this helps maintain PC
security.
Password Caution:
change the default password to better protect the
security of your modem. Use a safe password! Your
first name spelled backwards is not a sufficiently safe
password; a password such as xfT35$4 is better.
•
Click the Login button. The Web Management Home
screen displays.
4. Use the Setup Wizard for Quick Configuration
A quick way to configure the modem is to use the Wizard
Setup in the Web Management software.
•
To begin configuration, click the Wizard Setup button
located under the menu bar.
•
After clicking the Wizard Setup button, the Wizard
Setup screen displays.
Multi-Tech Systems, Inc. Quick Start Guide
The User name and
It is recommended that you
11