Connecting To Two Bluetooth Devices At The Same Time (Multi-Point Connection) - Yamaha TW-E3C User Manual

Bluetooth® Connectivity > Connecting to two Bluetooth devices at the same time (multi-point connection)
Connecting to two Bluetooth devices at the same time
(multi-point connection)
This product features multi-point connection, which lets you connect the product to two Bluetooth devices
to which it has been paired at the same time. For instance, this is useful when you want to use this product to
listen to music on your computer, while being able to receive phone calls on your smartphone.
For multi-point connection, pair (register) this product beforehand with the first Bluetooth device to which
you wish to connect.
How to establish a multi-point connection
Use these steps to establish a multi-point connection. Check these steps before performing the operations
listed.
1) Connect the first Bluetooth device you want to connect to this product.
2) Set this product to pairing standby mode, and connect the second Bluetooth device.
Doing so temporarily disconnects the first Bluetooth device.
3) Reconnect to the first Bluetooth device.
Now you've finished connecting to two Bluetooth devices.
Steps for multi-point connection
Here are the operations for establishing a multi-point connection.
1
Activate Bluetooth on the first Bluetooth device you want to connect.
2
Remove the earbuds from the charging case.
The earbuds will turn on and both earbuds automatically connect to the first Bluetooth device.
Once connected, the indicators light up as shown below.
Lights up for 1 sec
If successfully connected, you will hear the "Connected" audio message in the earbud.
If the earbuds do not automatically connect to a Bluetooth device, they are waiting for a
connection or are in pairing standby mode. Make the connection to the earbuds from your
Bluetooth device.
Earbud that is now primary
24
Lights up for 1 sec
Lights up for 10 sec