YAMAHA YH-E500A - Headphones User Guide

Also See for YH-E500A:

User manual (46 pages)

Table of Contents

Contents

1 Overview
2 Introduction
- 2.1 Product, Accessory and Part Names
3 Preparation
- 3.1 Charging
- 3.2 Making a Bluetooth connection
4 Basic operations
- 4.1 Listening to music
- 4.2 Using the phone
5 Specifications
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

YAMAHA YH-E500A - Headphones User Guide

Overview

Introduction

For correct and safe use of this product, be sure to first read this manual and the separate "Safety Brochure".
After reading this manual, keep it together with the warranty card in a safe place for future reference.

Product, Accessory and Part Names

Headband
Housing
* The microphone is built in.
Function key
Indicator
+ key
– key
Charging connector
ANC key
USB power cable
External input jack
3.5mm stereo mini plug cable
Quick Start Guide
User Guide (Basic) (this manual)
Safety Brochure
Carrying case

Preparation

Charging

With the included USB power cable, connect the charging connector on the headphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

The indicator is lit in red during charging and goes off when charging is completed.
Charging takes about 3.5 hours. When charged, the headphones can play back continuously for approximately 38 hours.

Making a Bluetooth® connection

When using the headphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

Pairing

Hold down the function key for at least five seconds to enter pairing standby.

The indicator flashes alternately in blue and red.

Operate the connected Bluetooth device to display the Bluetooth setting screen.
Select "Yamaha YH-E500A" from the displayed screen.

When pairing has completed, the indicator lights up in blue for 20 seconds.
If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
To try pairing again, turn the power off and start again from step 1.

Registering another Bluetooth device/ Perform pairing operations again
Turn the power off, and then start from step 1 of "Pairing".

Turning on/off
Hold down the function key for two seconds to turn the headphones on/off.

After the headphones turn on, the indicator flashes in red to indicate the remaining battery power.

Basic operations

Listening to music

Play	Briefly press the function key once.
Pause	During playback, briefly press the function key once.
Raise the volume	Briefly press the + key once.
Lower the volume	Briefly press the – key once.
Skip to the next song	Hold down the + key for two seconds, until you hear a "beep" sound.
Skip to the previous song	Hold down the – key for two seconds, until you hear a "beep" sound.
Enable/disable AMBIENT SOUND and NOISE CANCELLING	Press the ANC key.

* You can also use this product as a regular pair of headphones by connecting the 3.5 mm stereo mini-plug cable that is included.

Using the phone

Receive a phone call	When a phone call comes in, briefly press the function key once.
End a phone call	During the phone call, briefly press the function key once.
Raise the conversation volume	Briefly press the + key once.
Lower the conversation volume	Briefly press the – key once.
Ignore a call	When a phone call comes in, briefly press the function key twice.

Specifications

Bluetooth version	Version 5.0
Supported profiles	A2DP, AVRCP, HFP, HSP
Supported codecs	SBC, AAC, Qualcomm® aptX ™, aptX HD ™
RF Output Power	Class1
Maximum communication range	Approximately 10 m (without interference)
Number of devices that can be registered	Up to 8 devices
Internal rechargeable battery	Lithium-ion battery
Charging time	Approximately 3.5 hours
Continuous playback time	Approximately 38 hours
Charging temperature	5 – 40°C

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

[Europe model]
Wireless communication functions
Bluetooth
Radio Frequency (Operational Frequency): 2402 MHz to 2480 MHz
Maximum Output Power (EIRP): 9.5 dBm

Yamaha Global Site https://www.yamaha.com/
Yamaha Downloads https://download.yamaha.com/
Manual Development Group
© 2020 Yamaha Corporation