Yamaha TW-E3C User Manual page 20

Bluetooth® Connectivity > Pairing for the First Time
3
Select this product from the list on your Bluetooth device.
Select the listing that reads "Yamaha..." and not the listing that reads "LE-Yamaha...".
Yamaha TW-E3C
Once connected, the indicator on the primary earbud lights up as shown below. You will hear
the "Connected" audio message in the earbud.
Pairing and connection are now complete.
Earbud that is now primary
NOTE
Pairing standby mode will automatically end on this product after about two minutes. To pair again or if the connection was
(
unsuccessful, place the earbuds back into the charging case and start again at step 1.
If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
(
One of the earbuds (L or R) will be the primary earbud when connecting, according to their remaining battery power.
(
This product cannot be paired with devices that require a passkey when pairing, as this feature is unsupported.
(
Related links
"Pairing with a Different Device" (p.21)
(
"Connecting to a Device Already Paired" (p.23)
(
"Connecting to two Bluetooth devices at the same time (multi-point connection)" (p.24)
(
"About the "Headphone Control" app" (p.36)
(
"Using only one of the earbuds" (p.49)
(
Lights up for 10 sec
20