Yamaha TW-E3A - Truly Wireless Earphones Manual

Introduction

• For correct and safe use of this product, be sure to first read this manual and the separate "Safety Brochure".
• After reading this manual, keep it together with the warranty card in a safe place for future reference.

Product, Accessory and Part Names

(A)

1. Earphones (L, R)
   * The microphone is built in.
2. Function key
3. Indicator
4. Charging case
5. Charging connector
6. Eartips (SS, S, M, L) 1 set each
   * The M-size eartips are attached.
7. Silicone Sleeve (S, M) 1 set each
   * The S-size silicone sleeves are attached.
8. USB power cable
9. Startup Guide
10. User's Guide (Basic) (this manual)
11. Safety Brochure

Preparation

Charging

(B) To charge the charging case and earphones, connect the included USB power cable to the charging connector on the charging case and to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

• The indicator is lit in orange during charging and goes off when charging is completed.
• Charging takes about two hours. When charged, the earphones can play back continuously for approximately 6 hours.

Making a Bluetooth® connection

(C) When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

Pairing

1. Remove the right earphone from the charging case.

• The indicator on the right earphone flashes alternately in blue and red, and the earphone enters pairing standby mode.

2. Remove the left earphone from the charging case.
3. Operate the connected Bluetooth device to display the Bluetooth setting screen.
4. Select "Yamaha TW-E3A R" from the displayed screen.

• When pairing has completed, the indicator lights up in blue for 20 seconds.
• If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off. To try pairing again, turn the earphones off, then on again.

Registering another Bluetooth device/ Perform pairing operations again

For details about paring, refer to the this website.

Turning on

Remove the earphones from the charging case. Otherwise, press the function key on each earphone (left and right) for two seconds.

• When the earphone turns on, the indicator lights up in blue (for one second).

Turning off

Place the earphone in the charging case. Otherwise, press the function key on each earphone (left and right) for five seconds.

• When the earphone turns off, the indicator lights up in red (for one second).

Basic operations

Listening to music

Using the phone

Specifications

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

[Europe model]
Wireless communication functions
Bluetooth
Radio Frequency (Operational Frequency): 2402 MHz to 2480 MHz
Maximum Output Power (E.I.R.P): -1.14 dBm

Yamaha Global Site https://www.yamaha.com/
Yamaha Downloads https://download.yamaha.com/
Manual Development Group
© 2019 Yamaha Corporation