YAMAHA YH-L700A - Headphones User Guide

Also See for YH-L700A:

User manual (54 pages)

Owner's manual (6 pages)

Table of Contents

Contents

1 Introduction
2 Product, Accessory and Part Names
3 Preparation
- 3.1 Charging
- 3.2 Making a Bluetooth connection
4 Basic operations
- 4.1 Listening to music
- 4.2 Using the phone
5 Specifications
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

YAMAHA YH-L700A - Headphones User Guide

Introduction

For correct and safe use of this product, be sure to first read this manual and the separate "Safety Brochure".
After reading this manual, keep it together with the warranty card in a safe place for future reference.

Instructions

Product, Accessory and Part Names

Headband
Housing
3D key
Power key
Indicator
Charging connector
– key
Function key
+ key
Microphone
USB power cable
External input jack
ANC key
3.5mm stereo mini plug cable
Flight Adaptor
Quick Start Guide
User Guide (Basic) (this manual)
Safety Brochure
Carrying case

Preparation

Charging

With the included USB power cable, connect the charging connector on the headphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

The indicator is lit in red during charging and goes off when charging is completed.
Charging takes about 3.5 hours. When charged, the headphones can playback continuously for around 34 hours (with ADVANCED ANC) or around 11 hours (with ADVANCED ANC and 3D SOUND FIELD).

Making a Bluetooth^® connection

When using the headphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

Pairing

Hold down the power key for at least five seconds to enter pairing standby.
- The indicator flashes alternately in blue and red.
Operate the connected Bluetooth device to display the Bluetooth setting screen.
Select "Yamaha YH-L700A" from the displayed screen.
- When pairing has completed, the indicator lights up in blue for 20 seconds.
- If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
- To try pairing again, turn the power off and start again from step 1.

Registering another Bluetooth device/ Perform pairing operations again

Turn the power off, and then start from step 1 of "Pairing".

Turning on/off

Hold down the power key for two seconds to turn the headphones on/off.

After the headphones turn on, the indicator flashes in red to indicate the remaining battery power.

Basic operations

Listening to music

Play	Briefly press the function key once.
Pause	During playback, briefly press the function key once.
Raise the volume	Briefly press the + key once.
Lower the volume	Briefly press the – key once.
Skip to the next song	Hold down the + key for two seconds.
Go back to the beginning of the song, or skip to the previous song	Hold down the – key for two seconds.
Enable or disable ADVANCED ANC and AMBIENT SOUND	Press the ANC key.
Enable or disable 3D SOUND FIELD	Hold down the 3D key for two seconds.
Switch to a different 3D SOUND FIELD mode (when 3D SOUND FIELD is enabled)	Briefly press the 3D key.

* You can also use this product by connecting the 3.5 mm stereo mini-plug cable that is included.

Using the phone

Receive a phone call	When a phone call comes in, briefly press the function key once.
End a phone call	During the phone call, briefly press the function key once.
Raise the conversation volume	Briefly press the + key once.
Lower the conversation volume	Briefly press the – key once.
Ignore a call	When a phone call comes in, hold down the function key for two seconds.

Specifications

Bluetooth version	Version 5.0
Supported profiles	A2DP, AVRCP, HFP, HSP
Supported codecs	SBC, AAC, Qualcomm^® aptX™ Adaptive
RF Output Power	Class 2
Maximum communication range	Approximately 10 m (without interference)
Number of devices that can be registered	Up to 8 devices
Internal rechargeable battery	Lithium-ion battery
Charging time	Approximately 3.5 hours
Continuous playback time	Approximately 34 hours (with ADVANCED ANC) Approximately 11 hours (with ADVANCED ANC and 3D SOUND FIELD)
Charging temperature	5 – 40°C

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.