Hardware Installation; Site Location - ESI IVX S-Class Installation Manual

IVX S-Class Installation Manual

Hardware installation

Site location

As with most electronic equipment, the environmental considerations for this site need to observe good
common sense. Provide a dry, clean, and accessible area.
Locate space in the telephone equipment room, which will provide easy connection to the 66 blocks and
110VAC power. The location should be no further than 1,000 feet from the farthest station.
Ambient room temperature must be 40
Notes: Do not place the equipment or run station cabling near high voltage electrical equipment or electrical
lines susceptible to high voltage surges from air conditioner compressors, etc.
Do not mount the equipment in a place that receives direct sunlight.
The system and supporting components should be mounted to a half-inch (or thicker) plywood backboard.
Here is the layout of a typical IVX S-Class installation:
B.6
0 0
–80 (F.), and relative humidity no higher than 90%.
IVX S-Class typical installation
Hardware overview/installation