Part B: Connecting To Telephony Service - Multitech FaxFinder FF200 Administrator User Manual

If it is a 192.168.2.x subnet, connect from the Administrative PC to the FaxFinder until the
FaxFinder's IP address has been configured. Thereafter, connect the FaxFinder into the
network.

Part B: Connecting to Telephony Service

The FF200's fax modems can either be connected to a PBX (for use in PBX Routing Mode) or to a
POTS line (for use in POTS Mode).
An RJ11-to-RJ11 cable is included with your FaxFinder.
PBX Routing Mode
Multi-Tech Systems, Inc.
Connection for
PBX Routing Mode
Plug one end of the phone
cable into the FaxFinder's
LINE jack and the other into
an available Station Port on
the PBX.
POWER
Line 2 Ethernet
Line 1 5Vdc
10/100
FF200 FaxFinder Fax Server Admin User Guide
Chapter 3: Server Installation
Connection for
POTS Mode
Plug one end of the
phone cable into the
FaxFinder's LINE jack
and the other end into
your standard
telephone receptacle.
POTS Mode
POWER
Ethernet
Line 2 Line 1
5Vdc
10/100
22