Front Panel - Multitech RouteFinder RF850 User Manual

Front Panel

LEDs Description
10MB WAN1, WAN2/DMZ Lights when a successful 10Base-T Internet connection is
established.
LAN
ACT WAN1, WAN2/DMZ
LAN
WAN1, WAN2/DMZ Lights when a successful 100Base-T Internet connection is
100MB
established.
LAN
Disk ACT Lights when the disk drive is accessed.
Status When functioning normally, the LED blinks. The LED is a solid light when the
RouteFinder is booting up, saving the configuration, restarting, or updating the
firmware.
Power Lights when power is being supplied to the RouteFinder.
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
Lights when a successful 10Base-T Ethernet connection is established.
Blinks when it is receiving or transmitting data.
Blinks when it is receiving or transmitting data.
Lights when a successful 100Base-T Ethernet connection is established.
Chapter 2 – Installation and Setup
14