Packet Filters > Enable/Disable Log - Multitech RouteFinder RF850 User Manual

Packet Filters > Enable/Disable Log
On this screen you can enable/disable RouteFinder firewall logging.
Prerequisite: Enable Logging on the Administration > System Setup > System Logging screen.
Enable/Disable Logging
Permitted Inbound Access Logs
Check this box to enable the logging of all permitted inbound access requests from public (WAN)
network clients that use a service hosted on the RouteFinder itself or on a private (LAN) or service
(DMZ) server/host.
Permitted Outbound Access Logs
Check this box to enable the logging of all permitted outbound access requests from private (LAN)
and service (DMZ) network clients that use a service on a public (WAN) network server/host.
All Access Requests Traversing Firewall Violating Security Policy
Check this box to enable the logging of all access requests from private (LAN), service (DMZ), and
public (WAN) network clients to traverse the RouteFinder that violate the configured security policy.
All Access Requests to Firewall Violating Security Policy
Check this box to enable the logging of all access requests from private (LAN), service (DMZ), and
public (WAN) network clients to send traffic to the RouteFinder itself, that violate the configured
security policy.
Log Access to Admin Port
Check this box to enable the logging of all access requests from private (LAN), service (DMZ), and
public (WAN) network clients to send traffic to the RouteFinder itself on the administrative access
port.
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
Chapter 6 – RouteFinder Software
Packet Filters > Enable/Disable Log
113