Administration > Intrusion Detection - Multitech RouteFinder RF850 User Manual

Administration > Intrusion Detection
The Intrusion Detection mechanism notifies the administrator if there has been any tampering with the files on
the server.
Network Options Available When Load Balancing is Enabled:
Intrusion Detection
Enable File Integrity Check
Check the box to enable File Integrity Checking.
Time Interval
Select the amount of time you would like the system to conduct this check. Options are every 5
Minutes, Hourly, or Daily. Then click the Save button.
Network Intrusion Detection
This allows the administrator to detect attacks on the network. When this feature is enabled, it
informs the administrator by email as soon as the attack has been logged. The administrator can
decide what actions are to be taken. By default, DOS attack, minimum fragmentation checks, port
scans, DNS attacks, bad packets, overflows, chat accesses, Web attacks will be detected; and then
the administrator is informed. Apart from the above, the other user-defined rules for intrusion
detection can be configured.
When Load Balancing is disabled, you have the following options:
• Network Intrusion Detection for LAN:
for the LAN. Then click the Save button.
• Network Intrusion Detection for WAN:
for the WAN. Then click the Save button.
• Network Intrusion Detection for DMZ:
for the DMZ. Then click the Save button.
When Load Balancing is enabled, you have the following options:
• Network Intrusion Detection for LAN:
for the LAN. Then click the Save button.
• Network Intrusion Detection for WANLINK1:
Detection for the WANLINK1. Then click the Save button.
• Network Intrusion Detection for WANLINK2:
Detection for the WANLINK2. Then click the Save button.
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
Chapter 6 – RouteFinder Software
Administration > Intruder Detection
Check this box to enable Network Intrusion Detection
Check the box to enable Network Intrusion Detection
Check the box to enable Network Intrusion Detection
Check this box to enable Network Intrusion Detection
Check the box to enable Network Intrusion
Check the box to enable Network Intrusion
50