1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Firewall
  5. RouteFinder RF850
  6. Quick start manual

Multitech RouteFinder RF850 Quick Start Manual

Internet security appliance
Hide thumbs Also See for RouteFinder RF850:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
®
RouteFinder
Internet Security Appliance
RF850
RF860
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Multitech RouteFinder RF850

Summary of Contents for Multitech RouteFinder RF850

  • Page 1 ® RouteFinder Internet Security Appliance RF850 RF860 Quick Start Guide...
  • Page 2 RouteFinder RF850/860 82100051L, Revision B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2006-7, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

  • Page 3: Table Of Contents

    Example 3 – Remote Client-to-LAN Configuration Using DNAT and Aliasing ... 27 Example 4 – Client-to-LAN Configuration Using PPTP Tunneling ... 28 Checking the Tunnel ... 28 Chapter 5 – URL Categorization ... 29 Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Contents Table of Contents...

  • Page 4: Chapter 1 - Introduction

    This equipment should only be installed by properly qualified service personnel. • Only connect like circuits. In other words, connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits and TN (Telecommunications Network) circuits to TN circuits. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)

  • Page 5: Shutdown Caution

    RouteFinder hard drive. Note: If any of these items are missing, contact Multi-Tech Systems or your dealer or distributor. Inspect the contents for signs of any shipping damage. If damage is observed, do not power up the RouteFinder; contact Technical Support at Multi-Tech Systems, Inc. for advice.

  • Page 6: Chapter 2 - Installation

    Blinks when it is receiving or transmitting data. Lights when the LAN port has a valid Ethernet connection. Blinks when it is receiving or transmitting data. established. Lights when a successful 100Base-T Ethernet connection is established. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)

  • Page 7: Cabling Procedure

    Using a DB-15 DSUB cable, connect the VIDEO port to a monitor. Connect the Keyboard jack to a keyboard. Using a USB connector, connect a memory stick, a floppy drive, a CD-ROM drive, a keyboard, mouse, etc. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 2 – Installation...

  • Page 8: Setting Up A Workstation And Starting The Routefinder

    Click Start | Settings | Control Panel. Double-click the Network Connections icon. The Network Connections screen displays. Right-click the Local Area Connection icon and choose Properties from the drop down list. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
  • Page 9 Enter the Default gateway as 192.168.2.1 Close out of the Control Panel. Repeat these steps for each PC on your network. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 2 – Installation Once you click the Properties button, the following screen displays.

  • Page 10: Open A Web Browser

    Be sure to type https (http will not work). Note: Make sure your PC’s IP address is in the same network as the router’s IP address. IPCONFIG is a tool for finding a computer’s default gateway and MAC address. In some environments, one or more Security Alert screen(s) may display. At the following Security Alert screen, click Yes and follow any additional on-screen prompts.

  • Page 11: Web Management Software Opens

    When you click one of the Menu Bar buttons, the first sub-menu option displays. You can choose other sub- menu screens by clicking the screen name in the sub-menu list. This is an example of the Networks & Services sub-menu. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 2 – Installation Other...
  • Page 12 POP3 Proxy POP3 SPAM Filtering Advanced Configurations SOCKS Proxy DNS Proxy IPSec X.509 Certificates IPSec Bridging PPTP Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Network Setup DHCP Server Interface Subnet Settings Fixed Addresses PPPoE DHCP Client Dynamic DNS Routes...

  • Page 13: Chapter 3 - Configuration Using Web Management Software

    Using the Wizard Setup is a quick way to enter the basic configuration parameters to allow communication between the LAN’s workstation(s) and the Internet as shown in the example below. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software...

  • Page 14: The Wizard Setup Screen

    Enter the WAN IP Address. This is the PUBLIC STATIC IP address. Set this option based on information provided by your ISP. Example: 204.26.122.103 Change the Gateway IP address. This is the IP address of the router that connects to the Internet. Example: 204.26.122.1 Place a checkmark in the Packet Filter Rule LAN-ANY-ANY-ACCEPT box to enable the rule.

  • Page 15: Chapter 4 - Configuration Examples

    Mask. For this example, enter the following: Name: Remote-LAN IP Address: 192.168.25.0 Subnet Mask: 255.255.255.0 Click Add to add the network to the list. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software Examples Side A Side B...
  • Page 16 Click the VPN Status check box to enable IPSec. Then click the Save button. Select Add IKE Connection by clicking the corresponding Add button. Example 1 –Two RouteFinders – Side A Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
  • Page 17 Important Note: Make sure to check the Status box for this VPN tunnel in order to activate it. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software Example 1 –Two RouteFinders – Side A...
  • Page 18 Click Add to add the network to the list Note: The same address/mask pair should not be present in the current list displayed on the screen. Example 1 –Two RouteFinders – Side B Side B Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
  • Page 19 Click the VPN Status check box to enable IPSec. Then click the Save button. Select Add an IKE Connection by clicking the corresponding Add button. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software...
  • Page 20 The VPN > IPSec Status screen displays; this time showing the newly-created VPN tunnel. Important Note: Make sure to check the Status box for this VPN tunnel in order to activate it. Example 1 –Two RouteFinders – Side B Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)

  • Page 21: Example 2 - Set Up Two Routefinders Behind A Nat Device

    Subnet Mask: 255.255.255.255 Click the Add button to add the new network to the list. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software Example 2 –Two RouteFinders Behind a NAT Device – Side A...
  • Page 22 Click on the VPN Status check box to enable IPSec. Then click the Save button. Select Add an IKE Connection by clicking the corresponding Add button. Example 2 –Two RouteFinders Behind a NAT Device – Side A Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
  • Page 23 Status box for this VPN tunnel in order to activate it. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software Example 2 –Two RouteFinders Behind a NAT Device – Side A...
  • Page 24 IP Address: 192.168.10.0 Subnet Mask: 255.255.255.0 Click the Add button to add the new network to the list. Example 2 –Two RouteFinders Behind a NAT Device – Side B Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Side B...
  • Page 25 Click on the VPN Status check box to enable IPSec. Then click the Save button. Select Add an IKE Connection by clicking the corresponding Add button. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 3 – Configuration Using Web Management Software...
  • Page 26 The VPN > IPSec Status screen displays; this time showing the newly-created VPN tunnel. Important Note: Make sure to check the Status box for this VPN tunnel in order to activate it. Example 2 –Two RouteFinders Behind a NAT Device – Side B Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)

  • Page 27: Example 3 - Remote Client-To-Lan Configuration Using Dnat And Aliasing

    Add User Defined Packet Filter Rules LAN – ANY – ANY – Accept ANY – Telnet – Win2k_Pro – Accept ANY – Telnet – Win2k_Server – Accept Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 4 – Configuration Examples Example 3...

  • Page 28: Example 4 - Client-To-Lan Configuration Using Pptp Tunneling

    IPSec Live Log. You will see the connection up and running (if connected), and you will see the statistics related to the data being sent across the tunnel. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Example 4...

  • Page 29: Chapter 5 - Url Categorization

    License Key screen before the URL Categorization section of this screen displays. The 30-day free trial key number is located on the bottom of the RouteFinder chassis and on the front of the Quick Start Guide. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) The URL License number must be entered on the Administration >...
  • Page 30 Use the Allow and Filter buttons to move a URL Category from the URL Categories Allowed list to the URL Categories Filtered or from Filtered to Allowed. • When you are finished organizing the categories, click the Back button to exit the screen. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
  • Page 31 Filter categories are setup and controlled by the SurfControl software that is built into your RouteFinder. There may be a category you would like to see added or deleted. The User Guide provides instructions for these requests. Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) Chapter 5 – URL Categorization...
  • Page 32 82100051L...

This manual is also suitable for:

Routefinder rf860

Table of Contents