Chapter 2 - Installation; Installation Notes; Front Panel - Multitech RouteFinder RF850 Quick Start Manual

Chapter 2 – Installation
Chapter 2 – Installation

Installation Notes

See the User Guide for sections on Planning Your Network and Establishing an Address Table.

Front Panel

LEDs Description
10MB WAN1, WAN2/DMZ: Lights when a successful 10Base-T Internet connection is
LAN:
ACT WAN1, WAN2/DMZ: Lights when the port has a valid Internet connection.
LAN:
100MB WAN1, WAN2/DMZ: Lights when a successful 100Base-T Internet connection is
LAN:
Disk ACT Lights when the disk drive is accessed.
Status When functioning normally, the LED blinks. The LED is a solid light when the RouteFinder
is booting up, saving the configuration, restarting, or updating the firmware.
Power Lights when power is being supplied to the RouteFinder.
6
established.
Lights when a successful 10Base-T Ethernet connection is
established.
Blinks when it is receiving or transmitting data.
Lights when the LAN port has a valid Ethernet connection.
Blinks when it is receiving or transmitting data.
established.
Lights when a successful 100Base-T Ethernet connection is
established.
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)