Change Your Country/Region Code - Multitech RouteFinder RF850 User Manual

Change Your Country/Region Code

You will need to use a terminal (or run a data communications program on your computer) to communicate
with the modem and issue the commands. Use the following syntax, substituting the appropriate
country/region code:
Type AT%T19,0,nn, where nn is the country/region code in hexadecimal notation.
1.
Click Enter.
OK displays.
2. Then save the changes by issuing the following command:
AT&F&W
Click Enter.
3. To verify that the correct country/region has been configured, type:
ATI9
Click Enter.
The country/region code displays:
4.
Example: Country/Region AT Command (hexadecimal) Result code (decimal)
A list of country/region codes can be found on the Multi-Tech Web site at:
http://www.multitech.com/PRODUCTS/Categories/Device_Networking/global_modems/approvals.asp
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
Euro/NAM AT%T19,0,34 (default)
Chapter 6 – RouteFinder Software
Network Setup > PPP
52
89