Introduction To Virtual Private Networks - Multitech RouteFinder RF850 User Manual

VPN (Virtual Private Networks)
VPN > IPSec

Introduction to Virtual Private Networks

A Virtual Private Network (VPN) is useful in situations where information is sent and received via the Internet
and it is important that no third party can read or change that information. Such a connection is secured via VPN
software that is installed at both ends of the connection. This software allows authentication, key exchange, and
data encryption according to an open standard (IPSec).
The IPSec protocol suite, based on cryptographic technologies, provides security services at the IP network
layer. It secures network traffic providing guaranteed security for any application using the network. It can be
used to create private secured tunnels between two hosts, two security gateways, or a host and a security
gateway.
The VPN Main Screen
VPN IPSec Settings
VPN Status
Check the VPN Status checkbox to enable IPSec.
Click the Save button.
Add a New Connection
Add IKE Connection
Click the Add IKE Connection button. A screen displays for setting up an IKE connection.
Add Manual Connection
Click the Add Manual Connection button. A separate screen displays for setting up a manual
connection.
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
Chapter 6 – RouteFinder Software
VPN > IPSec
116