Administration > Version Information; Administration > Restart; Administration > Shutdown - Multitech RouteFinder RF850 User Manual

Administration > Version Information
This screen displays the number of the RouteFinder's current software and patches applied (if any).
Administration > Restart
1. Click the Restart button to shut down and restart the RouteFinder.
The message Are you sure you want to restart the system? is displayed.
2. Click the OK button to confirm that you want to restart the RouteFinder WebAdmin software. The
complete restart can take 4 to 5 minutes. When the restart process is complete, the RouteFinder will
generate 5 consecutive beeps; you can now continue RouteFinder operation.
If you do not want to restart the RouteFinder software, click Cancel.
Manual Restart
There may be instances in which your RouteFinder may need to be restarted manually. In this situation,
follow these steps:
•
Connect a keyboard and monitor to the RouteFinder and issue these commands:
∗
∗
•
Then type the following:
∗
•
Press Enter.
Administration > Shutdown
Click the Shutdown button to shut down the RouteFinder. This is the correct way to shut down the
RouteFinder. It ensures that all the services are shut down correctly.
Are you sure you want to shutdown the system? message displays.
•
If you do not want to shut down the RouteFinder, click the Cancel button to return to the
Administration > Shutdown menu.
•
If you want to shut down the RouteFinder, click the OK button to confirm.
The Login screen displays while the shut down process takes place (2 to 5 minutes). A continuous beep
occurs when shutdown is complete. At this point you can power off the RouteFinder.
Caution: You should switch off the RouteFinder power only after you have performed this Shutdown
process. If the RouteFinder is not properly shut down before switching off Power, the next start may take a
little longer. In the worst case, data could be lost. Since the RouteFinder is now also checking the
consistency of the file system, it may have to restart up to three times.
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E)
login as root
use password: admin (the default password)
/etc/multicong/scripts/bkupmain importbkp default
Chapter 6 – RouteFinder Software
Administration > Version Information
Administration > Restart
Administration > Shutdown
59