Multitech MultiVOIP 200 MVP200 User Manual page 40

MultiVOIP 200 User Guide
Note: Depending on your requirements, you may want calls that cannot make a connection to
London Office 1 (Hunt Group #2) to roll over to the New York office instead. In this case, you
would configure that phone entry to be listed as a member of HUNT GROUP #1.
47. Click OK and you are returned to the Phone Directory Database dialog box which now includes
the remote phone number and related information in the Phone Number list.
48. To configure a stand-alone endpoint (e.g., a PC with NetMeeting software), click Add (+) and the
Add/Edit Phone Entry dialog box is displayed again.
49. Enter the phone number for the stand-alone endpoint in the Station Information group Phone
Number field (e.g., 301).
50. Click inside the Description field and enter a description for the remote MultiVOIP 200 phone
number. For example, "Human Resources Desk."
Note: Because the H.323 endpoint is not a MultiVOIP 200, the Phone Directory database ignores
the Voice Channel entry, i.e., it does not matter what value is entered.
51. In the Station Identification group, select NO HUNT from the Hunt Group drop-down list, enter
the Human Resource Desk's IP Address (e.g., 202.198.100.04), and accept the H.323 industry
standard Port value (1720) used to communicate with other H.323 endpoints.
Note: This stand-alone was not configured as part of a Hunt Group. However, depending on your
40