ICP DAS USA PIO-D64 User Manual page 56

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
A-2-3 PIO_DriverClose

Description :
This subroutine closes the PIODIO Driver and releases the
resource from computer device resource. This function must be called
once before exiting the user's application.

Syntax :
WORD PIO_DriverClose ()

Parameter :
None

Return:
Please refer to " Table A.1".
A-2-4 PIO_GetConfigAddressSpace

Description :
The user can use this function to save resource of all PIO/PISO
cards installed in this system. Then the application program can control
all functions of PIO/PISO series card directly.

Syntax :
WORD PIO_GetConfigAddressSpace(wBoardNo,*wBase,*wIrq,
wSubVendor, *wSubDevice,*wSubAux,*wSlotBus,*wSlotDevice)

Parameter :
wBoardNo
wBase
wIrq
wSubVendor : [Output] Sub Vendor ID.
wSubDevice : [Output] Sub Device ID.
wSubAux
wSlotBus
wSlotDevice : [Output] Slot Device ID.

Return:
Please refer to " Table A.1".
PIO-D64/PIO-D64U User's Manual ( Ver.1.6, Mar. 2015, PMH-007-16 ) ----- 56
: [Input] Board number
: [Output] The base address of the board
: [Output] The IRQ number that the board using.
: [Output] Sub Aux ID.
: [Output] Slot Bus number.