User's Guide
Disabling the Wi-Fi
Slide the
switch to the left on the scanner to switch off the Wi-Fi.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Make sure that the scanner is turned off.
2. Set the
switch on the scanner to on.
3. Slide the
switch while holding down the
seconds to turn on the scanner.
and
lights flash alternately and the Ready light flashes.
The
4. The network settings are restored to their defaults when the lights stop flashing.
The scanner restarts automatically.
Network Settings
]
and
buttons and hold them there for approximately 10
25