Manual Reception - Olivetti d-COLORMF2604 Operation Manual

Manual Reception

This method allows you to receive faxes by operating this machine after confirming that the telephone line has
connected to the sending system. Connecting a telephone set (commercially available product) to this machine
enables you to receive originals after talking to the person at the sending system.
Part that is operated
NOTE:
FAX Automatic Reception has been preset for the receiving mode of this machine. To use Manual
Reception, you need to change the receiving mode to Manual Reception. To change to manual mode, refer to
Receiving Mode on page 6-17.
Receiving after Confirming Connection to the Sending System
You can receive originals after confirming by sound that the telephone line has connected to the sending
system.
On Hook:
*
[Manual RX]
Using the Telephone to Receive
Use this method when you want to receive originals after talking to the person at the sending system.
1
When there is an incoming call, the machine
makes a ringing tone.
2
Press the FAX key.
3
Press the On Hook key.
4
Press [ManualRX] (the Left Select key).
5
After the sending side has started transmission,
the machine starts receiving the originals.
1
When there is an incoming call, the telephone
connected to the machine makes a ringing tone.
4-12
FAX Operation (Advanced)