Battery Charging - BRAYER BR4266 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

place until the lock (15) clicking.

Attaching the extension pipe

• Insert the extension pipe (10) into the vacuum

cleaner air inlet untilthe clamp (9) clicking (pic.2).

• Connect the electric brush (12) to the extension pipe

(10) (pic.3).

• The Electric Brush (12) can be attached to the Air

Inlet of the Vacuum Cleaner (Fig. 4).

• To detach the extension pipe (10) from the vacuum

cleaner press and hold the clamp (9).

•

To detach the electric brush (12) from the extension

pipe (10) press and hold the clamp (11).

Electric brush

• Use the electric brush (12) for cleaning rooms with

smooth floors or carpets with medium and low pile.

Notes:

– do not use the electric brush (12) if the pile length

exceeds 15 mm.

– do not run the electric brush (12) over electric wires.

UNIVERSAL NOZZLE

• The Universal Nozzle (21) is intended for cleaning

radiators, crevices, and so on; as well as for

dedusting furniture surfaces. The fibers on the brush

prevent damage to the polished furniture surfaces.

When using the Vacuum Cleaner, install the Nozzle

(23) into the necessary position by pressing the Lock.

• You can attach the crevice nozzle (21) to the

extension pipe (10) (pic. 5) or to the air inlet of the

vacuum cleaner (pic. 6).

WALL-MOUNTED HOLDER OF THE VACUUM

CLEANER

• Select the storage place for the vacuum cleaner/the

battery charging. Place the wall-mounted holder (23)

near the mains socket.

• Place the wall-mounted holder (23) so that the

vacuum cleaner does not hang. The vacuum cleaner

should rest on the electric brush (12).

• IMake sure that no electric wiring or other utilities is

inside the selected wall area before drilling orifices

in it.

• Fasten the wall-mounted holder (23) with dowels and

fastening screws.

• Dock the Vacuum Cleaner to the Wall Mount (23)

(Fig. 8).